Optical Drive removal Advent 7011 7082 7083 7088 7096 7102 7105  7108 7109 7109B

E Ei System 3085 3086 3090 1105 4410

Removing the Optical Drive

• If you want to remove the optical drive while the computer is turned on, double-click the Safely Remove Hardware icon on the taskbar, click the device that you want to eject, and click Stop. Otherwise go to step 2.
  
   
• Open CD Tray, close your display and turn the computer upside down.
  
   
• Use a Phillips screwdriver to remove the 2 x M2.5 x 8-mm screw's indicated by arrows in picture below. (sometimes no2 near screw)

• Gently Pull the device straight out of the media bay, it should pull out very easy don't use force double check or ASK.

Installing the Optical Drive

1. Slide the new drive into the bay until it snaps securely into place.
   
    
2. Replace the 2 x M2.5 x 8-mm screws.
   
    
3. Turn the computer right-side up and open the display.
   
    
4. The operating system automatically recognizes the device. If necessary, enter your password to unlock your computer.
    

Bracket from your broken/old drive are easily swapped over and fixed into pre drilled holes on back of drive.

Take Care! If you have to force it something's not right double check or ASK.

Home